Articles

310MM M/Y 2000 310mm Torque Converter Light Weight Redesign Mass was reduced by approx. 5.0 lbs and rotating inertia was reduced by 9%. Pump stamping was […]

Sonnax Chrysler Info from Bob Sonnax :The following information is compiled from post-rebuild drive-ability complaints, which may or may not be related to the converter .. […]

Internal Clearance Chrysler Torque Converters 241mm (9.5") 1.1mm-0.1mm (0.043"-0.004") 254mm (10") .076mm-0.13mm (0.030"-0.0055" 273mm (10.75") 1.14mm-0.13mm (0.45"-0.0055") 310mm (12.1") 0.76mm-0.025mm (0.030"-0.0012") Chrysler Specifications This applies to […]

Sonnax notes on Chrysler provided to TCRA Chrysler ' 99   Fluids: #9602 New for LH model and 2000 Lower viscosity & higher flow rates Results […]

Information on Chrysler Converters CHRYSLER Overall Heights TORQUE CONVERTERE OVERALL HEIGHT PILOT DIAMETER       MIN MAX 310mm-618 Diesel L/U 6.71   1.81 310mm-618 U-10 […]

Cummins diesel gains popularity Most rebuilders are rebuilding many Cummins converters daily. This converter is a high-profit item with a low failure rate after rebuild if […]

Grand Cherokee MC-22 Dodge Sprinter MC-18S Pilot Size 1.375 or 1.335 (Chrysler) Overall Height 5.830″ Clutch Clearance .038″ to .047″ Application: Various Chrysler applications with 722.6 […]

ll More on 722.6 converter identification Mercedes has used the 722.6 transmission in a number of different vehicles and in combination with different engines. To accommodate […]

When identifying the Chrysler Crossfire 722.6 converter, which is also used in the Jeep Grand Cherokee with 3.7L engine and Dodge/Freightliner Sprinter Van-type vehicle, be sure […]