TCRA News

The 10” front-wheel-drive Chrysler converter used in the 604 and 606 (41TE & 42LE) transmissions has undergone some changes in recent years. From the outside you […]

Note: This is the second in a two-part series on proper parting procedures. In Part 2, a look at a better method. When you’re parting a […]

Orifice Control Within the Converter Parts 1 and 2 briefly touched on the secondary oil paths through TCC pistons, turbines, and stator caps. This final article […]

Last month, in Part I of Blame the Torque Converter, a 2001 Volkswagen Jetta and a 2002 Toyota Tundra were both thought to have faulty torque […]

Three preventable bearing failures When a torque converter fails, the results are quite often catastrophic. It may be difficult to determine which component failed first and […]

Note: This is the first in a two-part series on proper parting procedures. In Part 1, some basics. When the first automatic transmissions were introduced in […]

Most torque converter rebuilders understand how oil flow within the converter harnesses engine torque and helps drive the vehicle. Unfortunately, many rebuilders have little knowledge of […]

Society often influences us to try to blame others for our problems. From an early age we try to place blame with friends or siblings. Our […]

If you were raised in a religious family you pro bably heard that “cleanliness is next to godliness.” If you happen to be the parent of […]